404 - The page could not be found

The page could not be found. It may be that there was an error or the page has been deleted. You can look for the page by using the search form or browsing through our content.

Choose a suitable size non-threaded base part

Tips for choosing the right labret post

3mm and 4mm options are available for the width of the back part of the post. Here are some things to consider when choosing the right size:

  • For piercings that are healing, we recommend a 4mm back part.
  • Piercings inside the mouth, e.g. a lip jewelry, also require a 4mm back part, so that the back part does not sink into the soft tissue inside the mouth.
  • If you choose a large, more decorative (e.g. arch-shaped) tip part, the Labret heel part 4mm width also gives your jewelry additional support.
  • The side of the nose with a 3mm piercing does not collect body fluids as much and does not take up space in the nostril. It is also not visible from there on the smaller back and does not feel uncomfortable to use.
  • In the tragus piercing, the 3mm back part makes it easier to use earphones and doesn’t collect so much earwax.

Tips for choosing length and thickness

Please note that the size suggestions are indicative recommendations and you can get confirmation of the perfect size for you from the piercing shop.

With a threadless labret base for the following piercings:

  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 5mm-7mm length.)
  • Cartilage jewelery (helix, forward helix, conch and tragus jewelery The most used sizes are 1.2mm thickness and 6mm-7mm length.)
  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 6mm-7mm length.)
  • Lip jewelry (medusa-, labret- Ashley jewelry, The most used sizes are 1.2mm thickness and 7mm-8mm length.)
  • If you have a basic earring in your piercing, we recommend 0.8mm thickness.

Choose the material you want

For easier jewelry installation

Selection of insertion pin size

Choose your insertion pin according to the size of the jewelry you ordered. If your jewelry is 1.2mm in size, also choose 1.2mm as the thickness of the insertion pin. The threadless insertion pin is suitable for the installation of jewelry without threads. You can also carefully bend the insertion pin slightly at an angle, so you can get it better for narrow ear piercings, such as forward helix and tragus piercings. Keep the insertion pin for your other jewelry as well, because you can use it on all your jewelry with the same thickness and fastening mechanisms.

The insertion pin can also be used as a stretcher!

The insertion pin is also very suitable for stretching. The insertion pin is designed so that one end is very thin, so that you can easily find your piercing hole, and the other end of the insertion pin is the size of the desired thickness. For example, if your septum jewelry is currently 1.2 mm thick, you can order a 1.6 mm thick insertion pin and a 1.6 mm thick jewelry that you can easily put in place with the insertion pin. This way you can safely reach the desired size little by little.

Installation pin suitable for threadless jewelry

LuxJewelle

Tervetuloa uudistuneeseen Luxjewelleen

Suomeksi palvelemme jatkossa osoitteessa: Luxjewelle.fi

Welcome to Luxjewelle

Continue shopping in english: Luxjewelle.com