Threadless Pin Insertion Tapers

Insertion pin for threadless piercing jewelry

If putting a push pin piercing jewelry in place at home seems challenging, here is the solution for you! These insertion pins help you get your piercing in place and make it downright easy! Attach the desired piercing jewelry to the end of the installation pin and then thread the installation pin through the piercing hole and the jewelry will slide neatly into place! Remove the insertion pin from the jewelry and after that you can just press the tip part of the jewelry closed!

With insertion pin, it is also easier for you to get a piece of jewelry into a piercing hole that has not had a piece of jewelry for a long time or has recently fallen out. In these cases, the piercing hole has often already closed a little, but it is quite possible to find and save it with the help of these insertion pins. The thin head ensures that you can find your piercing again and get the desired size piece of jewelry back in place (recommended to put 0.8mm-1.2mm maximum due to the risk of tissue damage).

How to choose the right size?

Choose your insertion pin according to the size of the jewelry you ordered. If your jewelry is 1.2mm in size, also choose 1.2mm as the thickness of the insertion pin. Choose a mounting pin also equipped with a non-threaded or threaded end, depending on the fastening mechanism of your jewelry. You can also carefully bend the insertion pin slightly at an angle, so you can get it better for narrow ear piercings, such as forward helix and tragus piercings. Keep the insertion pin for your other jewelry as well, because you can use it on all your jewelry with the same thickness and fastening mechanisms.

The insertion pin can also be used as a stretching stick!

The insertion pin is also very suitable for stretching. The insertion pin is designed so that one end is very thin, so that you can easily find your piercing hole, and the other end of the insertion pin is the size of the desired thickness. For example, if your septum jewelry is currently 1.2 mm thick, you can order a 1.6 mm thick insertion pin and a 1.6 mm thick jewelry that you can easily put in place with the insertion pin. This way you can safely reach the desired size little by little.